2MeV注入器脉冲电子束时间分辨能谱诊断研究

 介绍了利用磁分析器和电子束产生的契伦科夫辐射光诊断直线感应加速器脉冲电子束时间分辨能谱的原理、方法及诊断系统，对中物院2MeV感应叠加型注入器的2kA强流脉冲电子束时间分辨能谱进行实验诊断，并与二极管电压进行对比分析。测得能量约2.2MeV，60ns内最大能量变化为4%。     

多束速调管的增益带宽

 研究了M个束、N个共振腔的多束速调管(MBK)的增益和带宽，得到了描述小信号增益和带宽与器件结构参数和电子束参数关系的公式，给出了在不同参数下增益随频率的变化曲线。分析了多腔对增益，多束对带宽的影响。计算结果表明：多腔可以提高增益；多束可以降低Q值，从而可以增中带宽，带宽增加工了3.6%，还可以提高增益；对于MBK，频率交叉调谐对增加带宽不如频率调谐好；空间电荷波只对增益有影响，对带宽没有影响。最后，预估一种L带多束速调管的增益带宽为8.1%。     

一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

Thermal Equilibrium Between Radiation and Matter

In 1916, Einstein rederived the blackbody radiation law of Planck that originated the idea of quantized energy one hundred years ago. For this purpose, Einstein introduced the concept of transition probability, which had a profound influence on the development of quantum theory. In this article, we adopt Einstein's assumptions with two exceptions and seek the statistical condition for the thermal equilibrium of matter without referring to the inner details of either statistical thermodynamics or quantum theory. It is shown that the conditions of thermodynamic equilibrium of electromagnetic radiation and the energy balance of thermal radiation by the matter, between any of its two energy-states, not only result in Planck's radiation law and the Bohr frequency condition, but they remarkably yield the law of the statistical thermal equilibrium of matter: the Maxwell–Boltzmann distribution. Since the transition probabilities of the modern quantum theory of radiation coincide with their definition in Einstein's theory of blackbody radiation, the presented deduction of the Maxwell–Boltzmann distribution is equally valid within the bounds of modern quantum theory. Consequently, within the framework of the fundamental assumptions, the Maxwell–Boltzmann distribution of energy-states is not only a sufficient, but a necessary condition for thermal equilibrium between the matter and radiation.     

Dihalodimethyltin(IV) complexes of 2‐(pyrazol‐1‐ylmethyl)pyridine

Reaction of dichloro‐ and dibromodimethyltin(IV) with 2‐(pyrazol‐1‐ylmethyl)pyridine (PMP) afforded [SnMe₂Cl₂(PMP)] and [SnMe₂Br₂(PMP)] respectively. The new complexes were characterized by elemental analysis and mass spectrometry and by IR, Raman and NMR (¹H, ¹³C) spectroscopies. Structural studies by X‐ray diffraction techniques show that the compounds consist of discrete units with the tin atom octahedrally coordinated to the carbon atoms of the two methyl groups in a trans disposition (Sn? C = 2.097(5), 2.120(5) Å and 2.110(6), 2.121(6) Å in the chloro and in the bromo compounds respectively), two cis halogen atoms (Sn? Cl = 2.4908(16), 2.5447(17) Å; Sn? Br = 2.6875(11), 2.7464(9) Å) and the two donor atoms of the ligand (Sn? N = 2.407(4), 2.471(4) Å and 2.360(5), 2.455(5) Å). In both cases, the Sn? N(pyridine) bond length is markedly longer than the Sn? N(pyrazole) distance. Copyright © 2003 John Wiley & Sons, Ltd.     

Photoemission study of the modification of the electronic structure of transition-metal overlayers on TiO2 surfaces II. Cr on TiO2(0 0 1)

The electronic states of the Cr overlayers on TiO₂(0 0 1) surfaces have been investigated using angle-resolved and resonant photoemission spectroscopy with synchrotron radiation. At lower coverages, Cr deposition on TiO₂(0 0 1) creates two well separated in-gap emissions due to the formation of surface Ti³⁺ (3d¹) ions and Cr³⁺ (3d³) ions. At higher coverages, the in-gap emission is developed into the 2-peak-structure emission of Cr 3d character. The corresponding state is considered to be of metallic nature from the viewpoint of the high ability of oxygen adsorption, but has no Fermi edge, indicating a possibility of forming small Cr clusters on TiO₂(0 0 1) at this stage.     

BEPCⅡ束流相关本底的蒙特卡罗模拟研究(Ⅱ)—束流-气体相互作用

介绍了用蒙特卡罗方法研究正常对撞模式下束流本底中的束流-气体相互作用的原理与效果.使用通用的模拟工具,研究了BEPCⅡ的束流-气体本底对设计中的BESⅢ的影响.结果显示,在储存环上设置挡板后,探测器的本底在允许的范围之内.模拟结果对BEPCⅡ-BESⅢ的设计建造具有指导意义.     

对激光等离子体中X射线的产生与辐射加热研究

利用一维辐射流体力学程序MULTI数值模拟研究了功率为1014Wcm2、脉冲宽度为300ps、波长为0.44μm的强激光辐照平面Au靶时产生X射线的过程,给出了X射线转换效率和能谱分布.通过将靶物质划分为对所产生的X射线光学薄的转化区和光学厚的再发射区,得到了作为黑体辐射热源的最佳靶厚度,并给出了辐射加热靶所产生的等离子体的密度和温度的空间分布. 关键词： 辐射流体力学 激光等离子体 X射线转换 辐射热波     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

Tunneling radiation of a Gibbons-Maeda dilaton black hole

We use the Parikh-Wilczek method to treat Hawking radiation as a tunneling process across the event horizon and calculate the emission rate of a Gibbons-Maeda dilaton black hole. We show that if self-gravitation is taken into account, then the radiation deviates from the purely thermal spectrum, and the corrected spectrum is consistent with an underlying unitary theory. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 151, No. 1, pp. 172–175, April, 2007.